Author(s)

MengXing Zhang

Affiliation(s)

Postgraduate Brigade, Engineering University of PAP, Xi′an 710086, Shaanxi, China.

Corresponding Author

MengXing Zhang

ABSTRACT

In this paper, in view of the continuous emergence of new experimental methods and the continuous improvement of old methods, how to reasonably select so many design methods has become a major problem for the formulation designers, the three commonly used formulation design optimization methods are briefly described, their advantages and disadvantages as well as their applications, especially in the formulation design of pyrotechnic drugs, and through a comprehensive analysis of various experimental methods, it is hoped to help Through the comprehensive analysis of various experimental methods, it is hoped that it will help the formulation designers to choose the formulation design methods reasonably.

KEYWORDS

Formulation design; Optimisation methods; Pyrotechnics

CITE THIS PAPER

MengXing Zhang. Research on the design method of pyrotechnic formulae. Eurasia Journal of Science and Technology. 2024, 6(3): 50-52. DOI: 10.61784/ejst3014.

REFERENCES

[1] Liu L. Xin Z. Xiang. Introduction to formulation optimisation design method. Rubber and Plastic Technology and Equipment, 2004: 8-12.

[2] Wang Wei, Shi Xiuwen. Optimisation of low detonation rate mixed explosives formulation. Blasting, 2003(1): 89-91.

[3] Guan H. Research on anti-infrared/millimetre wave dual-mode smoke generator technology. Nanjing University of Science and Technology, 2005.

[4] Ma Hongwei. Research on the performance of high-precision boron deferred drug. Anhui University of Technology, 2009.

[5] Zou Jiaqi. Research on the design and performance of combustion-type red phosphorus-type fuming agent. Nanjing University of Science and Technology, 2019.

[6] Zunning Zhou, Pan Gongmai, LI Yi, et al. Homogeneous design of infrared fuming agent formulations. Journal of Fire Explosives, 2003(2): 76-79.

[7] Min Jun. Study on the infrared extinction performance of red phosphorus fuming agent based on uniform design. Nanjing University of Science and Technology, 2008.

[8] Zhou Mingshan, Xu Ming, Shen Ruiji, et al. Application of uniform design method to the infrared extinction performance of red phosphorus fuming agent. Energy-Containing Materials, 2009, 17(3): 353-356.

[9] Wang Zubei. Non-lethal acoustic bullet charge design based on uniform design method. Chemical Engineering and Equipment, 2016(2): 153-155.

[10] Lu Ming, Hu Bingcheng, Du Yang. Research on the formulation of high power seismic source pillars. Journal of Fire Explosives, 2004(4): 6-9+32.

[11] Du Qianwei, He Bin, Wang Yuling, et al. Design of metal-containing explosive formulation based on genetic algorithm. Journal of Shandong University (Engineering Edition), 2009, 39(5): 149-152.

[12] Jilin Xu. Design and performance study of TATP and TNT analogue. Nanjing University of Science and Technology, 2021.