IMIDAZOLIUM TETRAFLUOROBORATE INTERFACE-MODIFIED TIO2 ELECTRON TRANSPORT LAYER OF PEROVSKITE SOLAR CELLS
Keywords:
Perovskite solar cells, Interface modification, [BMIM]BF4Abstract
In this paper, [BMIM]BF4 is used to modify the interface of the TiO 2 electron transport layer for the purpose of passivating the interface. The research shows that the interface modification with [BMIM]BF4 reduces the surface defects of the TiO 2 electron transport layer, increases the Fermi level of the interface, reduces the carrier accumulation between the TiO 2 electron transport layer and the perovskite layer, and promotes charge transport. It enhances the electron extraction ability of the electron transport layer, fills the interface defects, and suppresses the non - radiative recombination of charges at the interface. It is beneficial to the growth of perovskite materials and increases the particle size of perovskite. It also improves the photoelectric conversion efficiency of the battery.References
[1] Cui Yupeng, Gong Jue, Liu Mingzhen. Regulation of Tin Dioxide Electron Transport Layers in Perovskite Solar Cells. Laser & Optoelectronics Progress, 2024, 61(05): 388-406.
[2] Hu X, Wang H, Ying Y, et al. Methylammonium chloride as an interface modificator for planar structure perovskite solar cells with a high open circuit voltage of 1.19 V. Journal of Power Sources, 2020, 480: 229073.
[3] Liu X, Wu J, Li G, et al. Defect Control Strategy by Bifunctional Thioacetamide at Low Temperature for Highly Efficient Planar Perovskite Solar Cells. ACS Applied Materials & Interfaces, 2020, 12(11): 12883-91.
[4] Chen Zijing. Research on High-performance Perovskite Solar Cells Based on Interface Modification. University of Chinese Academy of Sciences (Institute of Physics, Chinese Academy of Sciences), 2024.
[5] Jiang Jun, Yang Gonglü, Yang Yufan, et al. NbTaOx Interface Modification for High-Efficiency Perovskite Solar Cells. Semiconductor Technology, 2025, 50(01): 17-22.
[6] Li Qianyuan, Li Jiwei, Zhang Yuhan, et al. PbTiO 3 Modification and Polarization Treatment Enhance the Performance of Perovskite Solar Cells. Journal of Inorganic Materials, 2024, 39(11): 1205-1211.
[7] Xin Dehua, Wang Min, Zhang Yuanqun, et al. Preparation of Nb 2 O 5 /Nb 2 C Schottky junction and its research on full-spectrum photocatalytic degradation performance. Journal of Shanxi University (Natural Science Edition), 2025: 1-11. DOI: 10.13451/j.sxu.ns.2024143 .
[8] Ding Tongshun, Feng Ping, Sun Xuewen, et al. Research on the Passivation of Perovskite Thin Films by Fmoc-FF-OH and the Performance of Their Solar Cells. Journal of Inorganic Materials, 2023, 38(09): 1080-1083+98-102.
[9] Niu G, Li W, Meng F, et al. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells. Journal of Materials Chemistry A, 2014,
[10] Christians J A, Fung R C M, Kamat P V. An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide. Journal of the American Chemical Society, 2014, 136(2): 758-764.
[11] Li Bingxin, Zhao Zhixiu, Liang Jianfei, et al. Research on the Interface Regulation of Perovskite Solar Cells by Ultrathin BiOIO 3 . New Chemical Materials, 2025: 1-10. http://kns.cnki.net/kcms/detail/11.2357.TQ.20250121.1430.012.html .
[12] Zhang Xiaochun, Wang Likun, Shang Wenli, et al. Research on the preparation of high-performance inverted perovskite solar cells based on a double modification strategy. Acta Physica Sinica, 2025: 1-22. http://kns.cnki.net/kcms/detail/11.1958.O4.20241119.1418.002.html.