ANALYSIS, COMPARISON AND APPLICATION OF DRY AND WET DRILLING METHODS FOR ANTI-BUOYANCY ANCHOR BOLTS

Authors

  • RenHong Sun (Corresponding Author) China Construction Fourth Engineering Divion Corp.,Ltd., Guangdong 510000, Guangzhou, China , China Construction Fourth Engineering Bureau Construction Investment Co., Ltd., Shanghai 200000, China
  • ZongLin Yang China Construction Fourth Engineering Divion Corp.,Ltd., Guangdong 510000, Guangzhou, China , China Construction Fourth Engineering Bureau Construction Investment Co., Ltd., Shanghai 200000, China
  • ZhenHao Yao China Construction Fourth Engineering Divion Corp.,Ltd., Guangdong 510000, Guangzhou, China , China Construction Fourth Engineering Bureau Construction Investment Co., Ltd., Shanghai 200000, China
  • Bo Zhang China Construction Fourth Engineering Divion Corp.,Ltd., Guangdong 510000, Guangzhou, China , China Construction Fourth Engineering Bureau Construction Investment Co., Ltd., Shanghai 200000, China
  • ZhiYuan Zhang China Construction Fourth Engineering Divion Corp.,Ltd., Guangdong 510000, Guangzhou, China , China Construction Fourth Engineering Bureau Construction Investment Co., Ltd., Shanghai 200000, China
  • XiaoXia Zhao China Construction Fourth Engineering Divion Corp.,Ltd., Guangdong 510000, Guangzhou, China , China Construction Fourth Engineering Bureau Construction Investment Co., Ltd., Shanghai 200000, China
  • ZhiCheng Bai China Construction Fourth Engineering Divion Corp.,Ltd., Guangdong 510000, Guangzhou, China , China Construction Fourth Engineering Bureau Construction Investment Co., Ltd., Shanghai 200000, China

Keywords:

Anti-buoyancy anchor, Construction technology, Construction quality

Abstract

With urbanization and the continuous expansion of building scale, the load-bearing capacity of underground structures is becoming increasingly prominent. Anti-buoyancy anchors, as a practical foundation method, have been widely used in various building projects, such as basements, underground garages, and bridge foundations. This study aims to systematically explain the processes of two technologies and compare and analyze them from the perspectives of construction methods, construction quality, and cost. It provides a scientific theoretical basis and technical guidance for engineering practice, helping engineers make more rational technical choices in actual construction, improving project quality, reducing project costs, and achieving safe, efficient, and sustainable construction.

References

[1] Yang Shujuan, Zhang Tongbo, Lv Tianqi, et al. Analysis and research on anti-floating problem for basement and treatment measures. Architecture Technology, 2012, 43(12): 1067-1070.

[2] Zong Zhongling, Lv Fengwei. Analysis and reinforcement of upheaval of a basement. Architecture Technology, 2013, 44(11): 992-995.

[3] Qian Xutong, Chen Jing. Analysis of the causes of uplift in a basement and its reinforcement treatment. Foundation Treatment, 2021, 3(5): 415-419.

[4] Zhang Jingran, Geng Dajiang, Zhao Xiaoxia, et al. Impact of fully rotating steel casing bored pile on adjacent tunnels. Open Geosciences, 2024, 16: 20220600.

[5] Zhang Zhiyuan, Zhan Binqing, Zhao Xiaoxia, et al, Deformation of existing metro tunnels under close and complex construction disturbances: Case study. Advances in Engineering Technology Research, 2025, 168-178.

[6] Bai Zhicheng, Zhao Xiaoxia, Zhang Zhiyuan, et al. Analysis and Investigation on the Measured Data of Deformation of Existing Tunnel under the Construction of Side Foundation Pit in the Subway Protection Zone. JOURNAL OF THE GEOLOGICAL SOCIETY OF INDIA, 2025, 101 (9): 1410-1418.

[7] Lu Zhenhua. Introduction to anti-buoyancy anchor technology and research on engineering characteristics. Foundation Treatment, 2024, 6(2): 185-192.

[8] Geng Dongqing, Cheng Xuejun, Song Fuyuan, et al. Application of pressure-dispersing anchor in anti-buoyancy engineering of a foundation. Journal of Building Structures, 2005, 26(1): 119-124.

Downloads

Published

2026-01-26

Issue

Section

Research Article

DOI:

How to Cite

Sun, R., Yang, Z., Yao, Z., Zhang, B., Zhang, Z., Zhao, X., Bai, Z. (2026). Analysis, Comparison And Application Of Dry And Wet Drilling Methods For Anti-Buoyancy Anchor Bolts. Eurasia Journal of Science and Technology, 3(1), 8-12. https://doi.org/10.61784/mjet3033