ADVANCEMENTS IN THE DEVELOPMENT OF ELECTRO-HYDRAULIC COMPOSITE BRAKING SYSTEMS FOR ELECTRIC VEHICLES

Authors

  • Zoja Aksjonov (Corresponding Author) Tallinn University of Technology, Tallinn, Estonia.

Keywords:

Electro-hydraulic composite braking, Optimized design, System control, Test platform

Abstract

This paper meticulously categorizes, hones, and summarizes pertinent technical matterspertinent technical matters both domestically and internationally, focusing on the optimal design, system control, and testing platform of the electro-hydraulic composite braking system. It also presents a comprehensive review of the advancement of electro-hydraulic composite braking systems for electric vehicles, offering a future perspective. Research indicates that the integration, reliability, and robustness of electro-hydraulic composite braking systems are crucial areas for further improvement, as they emerge as a significant development trajectory for braking systems in electric vehicles.

References

[1] Li Yufang, Zhou Lili. Multi-boundary condition optimization design of control algorithm for electric-hydraulic composite braking system of pure electric vehicles. China Mechanical Engineering, 2012, 23(21): 2634-2640.

[2] Yu Zhuoping, Xiong Lu, Zhang Lijun. Research on matching of electro-hydraulic composite brake. Automotive Engineering, 2005(4): 455-457.

[3] Liu Qinghe, Sun Zechang, Wang Pengwei. Research on electro-hydraulic parallel braking system of electric vehicles. Automotive Engineering, 2008(6): 527-530.

[4] Hu Xiaoming, Xia Jingjing. Simulation analysis of dynamic characteristics of electronic hydraulic braking system. Modern Manufacturing Engineering, 2011 (11): 78-81.

[5] Song Shigang, Li Xiaoping, Sun Zechang. Analysis of series regenerative braking control strategy based on hybrid system theory. Automotive Engineering, 2015, 37 (3): 313-320.

[6] Lan Fengchong, He Xingfu, Sun Dashu. Research on electro-hydraulic composite control stability of four-wheel drive electric vehicles. Journal of South China University of Technology (Natural Science Edition), 2015, 43 (8): 62-68.

[7] Yang Pengfei, Xiong Lu, Yu Zhuoping. Joint control strategy of motor/hydraulic system of four-wheel hub motor driven electric vehicle. Automotive Engineering, 2013, 35(10):921-926.

[8] Zhou Lei, Luo Yugong, Li Keqiang. Integrated control of regenerative braking and anti-lock braking for electric vehicles. Journal of Tsinghua University (Natural Science Edition), 2009, 49(5): 728-732.

[9] YANG I, LEE W, HWANG I. A model-based design analysis of hydraulic braking system// SAE 2003 World Congress. Detroit, Michigan, USA: SAE International, 2003.

[10] GAO Y, EHSANI M. Electronic braking system of EV and HEV-integration of regenerative braking, automatic braking force control and ABS// Future Transportation Technology Conference. Detroit, Michigan, USA: SAE International, 2001.

[11] LEE C, MANZIE C. High-bandwidth clamp force control for an electromechanical brake. SAE International Journal of Passenger Cars-Electronic and Electrical Systems, 2012, 5(2): 590-599 .

[12] LEE C, MANZIE C. Near-time-optimal tracking controller design for an automotive electromechanical brake. Proceedings of the Institution of Mechanical Engineers: Part I: Journal of Systems and Control Engineering, 2012, 226( 14): 537-549 .

[13] HAN J, PARK Y, PARK Y. Cooperative regenerative braking control for front-wheel-drive hybrid electric vehicle based on adaptive regenerative brake torque optimization using under-steer index. International Journal of Automotive Technology, 2014, 15(6): 989-1000.

[14] Li Shoutao, Zhao Di, Ding Hui. Pedal stroke simulator control strategy for tandem master cylinder. Journal of Jilin University (Engineering Edition), 2017, 47 (6): 1886-1893.

[15] Pan Ning, Yu Liangyao, Song Jian. Classification and identification method of electric vehicle braking intention considering comfort. Journal of Tsinghua University (Natural Science Edition), 2016, 56 (10): 1097-1103.

[16] Liu Yang, Sun Zechang, Ji Wenbin. Pedal feeling of electro-hydraulic composite braking system and its influencing factors. Journal of Jilin University (Engineering Edition), 2015, 45(4): 1049-1055.

[17] SEMMLER S, ISERMANN R, SCHWARZ R. Wheel slip control for antilock braking systems using brake-by-wire actuators//SAE. SAE 2003 World Congress. Detroit, Michigan, USA: SAE International, 2003: 2003-01-0325.

[18] YAMATO M. Eco-vehicle assessment system (Eco-VAS): a comprehensive environmental impact assessment system for the entire development process. Toyota Technical Review, 2005, 54 (1): 80-85.

[19] FLEMING B. Electric vehicle collaboration-Toyota motor corporation and Tesla. IEEE Vehicular Technology Magazine, 2013, 8(1): 4-9.

[20] Liu Zhiqiang, Wang Haolei, Du Ronghua. Fuzzy control of electric vehicle feedback braking considering parameter sensitivity. Journal of Central South University (Natural Science Edition), 2016, 47(11): 3700-3706.

[21] KO J, KIM J, LEE G. Development of cooperative control algorithm for parallel HEV with electric booster brake during regenerative braking//2011 IEEE Vehicle Power and Propulsion Conference. Chicago, IL, USA: IEEE, 2011: 1-5.

[22] AMODEO M, FERRARA A, TERZAGHI R. Wheel slip control via second-order sliding-mode generation. IEEE Transactions on Intelligent Transportation Systems, 2010, 11 (1): 122-131.

[23] IVANOV V, SAVITSKI D, AUGSBURG K. Electric vehicles with individually controlled on-board motors: revisiting the ABS design//2015 IEEE International Conference on Mechatronics. Nagoya, Japan: IEEE, 2015: 323-328.

[24] Liu Shunan, Wang Qingnian, Zhang Zhongyuan. Digital electro-hydraulic proportional distribution system for automobile front and rear axle braking force. Journal of Tongji University (Natural Science Edition), 2001, 29(12):1462-1465.

[25] Pan Ning, Yu Liangyao, Zhang Lei. The comfort of anti-lock control of electro-hydraulic composite braking system. Journal of Zhejiang University (Engineering Edition), 2017, 51 (1): 9-16.

[26] Zhang Houzhong, Su Jian, Zheng Zhirong. Fuzzy PID electro-hydraulic composite braking control based on wheel speed error. Tractor and Agricultural Transport Vehicle, 2017, 44 (1): 31-37.

[27] Jin Liqiang, Sun Zhixiang, Wang Yi. Research on regenerative braking energy recovery of electric wheel vehicles based on fuzzy control. Automotive Engineering, 2017, 39 (10): 1101-1106.

[28] Yuan Xiwen, Wen Guilin, Zhou Bing. Integrated control of AFS and electro-hydraulic composite braking of distributed electric drive vehicles. Journal of Hunan University (Natural Science Edition), 2016, 43 (2): 28-35.

[29] JOC, HWANG S, KIM H. Clamping-force control for electromechanical brake. IEEE Transactions on Vehicular Technology, 2010, 59(7): 3205-3212.

Downloads

Published

2024-01-01

Issue

Vol. 2 No. 2 (2024)

Section

Research Article

DOI:

https://doi.org/10.61784/msmev2n224

How to Cite

Zoja Aksjonov. Advancements In The Development Of Electro-Hydraulic Composite Braking Systems For Electric Vehicles. Journal of Manufacturing Science and Mechanical Engineering. 2024, 2(2): 4-10. DOI: https://doi.org/10.61784/msmev2n224 .