INTEGRATED APPLICATION OF CADMIUM TELLURIDE THIN-FILM MODULES IN CURTAIN WALL ROOFS

Authors

  • XiaoJu Zhang China Construction Fourth Engineering Bureau Co., Ltd. Guangzhou 510000, Guangdong, China , China Construction Fourth Engineering Bureau Sixth Construction Co., Ltd. Hefei 230000, Anhui, China
  • YinGuang Wang (Corresponding Author) China Construction Fourth Engineering Bureau Co., Ltd. Guangzhou 510000, Guangdong, China , China Construction Fourth Engineering Bureau Sixth Construction Co., Ltd. Hefei 230000, Anhui, China
  • ShenShen Zhu China Construction Fourth Engineering Bureau Co., Ltd. Guangzhou 510000, Guangdong, China , China Construction Fourth Engineering Bureau Sixth Construction Co., Ltd. Hefei 230000, Anhui, China
  • XiaoXia Zhao China Construction Fourth Engineering Bureau Co., Ltd. Guangzhou 510000, Guangdong, China , China Construction Fourth Engineering Bureau Sixth Construction Co., Ltd. Hefei 230000, Anhui, China
  • YueQiang Cao China Construction Fourth Engineering Bureau Co., Ltd. Guangzhou 510000, Guangdong, China , China Construction Fourth Engineering Bureau Sixth Construction Co., Ltd. Hefei 230000, Anhui, China
  • ZhiCheng Bai China Construction Fourth Engineering Bureau Co., Ltd. Guangzhou 510000, Guangdong, China , China Construction Fourth Engineering Bureau Sixth Construction Co., Ltd. Hefei 230000, Anhui, China

Keywords:

Cadmium telluride film, Large exhibition hall, Curtain wall design, Curtain wall roof, Key technology, Application case

Abstract

As an important place for display and communication, the design of large exhibition halls must not only meet the requirements of aesthetics and functionality, but also be combined with its subsequent use and green construction. This paper aims to deepen the photovoltaic design of the skylight of large exhibition halls, considering its large area, ground-based structure and lighting projection area, and explore how to make full use of renewable energy such as light energy and heat energy while ensuring aesthetics and functionality. A set of perfect design and construction methods are proposed, and verified and applied through actual cases.

References

[1] China Academy of Building Research, Shanghai Academy of Building Research (Group) Co., Ltd. Green Building Evaluation Standard GB/T50378-2014 Table 5.2.16 Renewable Energy Utilization Scoring Rules. Beijing: China Building Industry Press, 2015.

[2] Nietic S, Cabo F G, Kragic I M, et al. Experimental and numerical investigation of a backside convective cooling mechanism on photovoltaic panels. Energy, 2016, 111: 211-225.

[3] Chen Hongbing, Niu Haoyu, Zhang Lei. Experimental study of heat pipe solar PV/T heat pump system under heating and collection mode. Renewable Energy, 2017, 35 (12): 1791-1797.

Downloads

Published

2024-01-01

Issue

Vol. 2 No. 2 (2024)

Section

Research Article

DOI:

https://doi.org/10.61784/wjer3003

How to Cite

Zhang, X., Wang, Y., Zhu, S., Zhao, X., Cao, Y., Bai, Z. (2024). Integrated Application Of Cadmium Telluride Thin-Film Modules In Curtain Wall Roofs. Eurasia Journal of Science and Technology, 2(2), 23-27. https://doi.org/10.61784/wjer3003